Tower and Façade Clock Movements

 

German Made Movemements

 

Options

 

  • Alternating minute impulse
  • Self-correcting TELNU time codes
  • For dials up to 12m diameter
  • With second hand
  • With illuminated hands
  • For floral clocks

 

MZW1300-IMP

Tower and Façade Clock Movements

 

High quality long life and maintenance-free movement for up to 1300mm (1.30m) dials
Stainless steel shafts, bronze, steel and cast iron gearing. Fully maintenance-free for up to a service life of 35+ years
Shaft support tube length from 40mm to 800mm depending on wall thickness

Operation:
24VDC 17mA Minute impulse or 240VAC 3-wire minute impulse (requires a master controller)

 

 

MZW1300-GPS Self-Correcting fully automatic time setting

 

Self-Correcting, high quality long life and maintenance-free movement for up to 1300mm (1.30m) dials
Stainless steel shafts, bronze, steel and cast iron gearing. Fully maintenance-free for up to a service life of 35+ years

Tower and Façade Clock Movements

Shaft support tube length from 40mm to 800mm depending on wall thickness

Operation:
Fully automatic self-correcting movement controlled directly from GPS Receiver

 

 

 

 

 

 

MZW2500-IMP

Tower and Façade Clock Movements

 

High quality long life and maintenance-free movement for up to 2500mm (2.50m) dials
Stainless steel shafts, bronze, steel and cast iron gearing. Fully maintenance-free for up to a service life of 35+ years
Shaft support tube length from 40mm to 800mm depending on wall thickness

Operation:
24VDC 17mA Minute impulse or 240VAC 3-wire minute impulse (requires a master controller)

 

MZW2500-GPS Self-Correcting fully automatic time setting

Tower and Façade Clock Movements

 

Self-Correcting, high quality long life and maintenance-free movement for up to 2500mm (2.50m) dials
Stainless steel shafts, bronze, steel and cast iron gearing. Fully maintenance-free for up to a service life of 35+ years
Shaft support tube length from 40mm to 800mm depending on wall thickness

Operation:
Fully automatic self-correcting movement controlled directly from GPS Receiver

 

 

MZW4000-IMP

Tower and Façade Clock Movements

 

High quality long life and maintenance-free movement for up to 4000mm (4.00m) dials
Stainless steel shafts, steel and cast iron gearing. Fully maintenance-free with a life expectancy of 35+ years
The lenght of the shaft support tube is available from 40mm to 800mm (depending on wall thickness)

Operation:
24VDC 17mA Minute impulse or 240VAC 3-wire minute impulse (requires a master controller)

 

MZW4000-GPS Self-Correcting fully automatic time setting

Tower and Façade Clock Movements

 

Self-Correcting, high quality long life and maintenance-free movement for up to 4000mm (4.0m) dials
Stainless steel shafts, bronze, steel and cast iron gearing. Fully maintenance-free for up to a service life of 35+ years
Shaft support tube length from 40mm to 800mm depending on wall thickness

Operation:
Fully automatic self-correcting movement controlled directly from GPS Receiver

 

 

Swiss Made Movemements

 

UFM150 - UFM250 - UFM500 - UFM700

Tower and Façade Clock Movements

 

Long life maintenance-free Swiss made movements are available
for face diameters of 1.50m to 7m.
Hours/min, hours/min/sec, illuminated hands and for floral clocks
Please ask our engineers

 

 

 

 

 

 

 

Enquire Now Contact Us