PREVIOUS PAGE HOME NEXT PAGE  

CONTACT HERTZ




Master Clocks, Timers

 

Mini Quartz Master Clock

For up to 10x slave clocks (max. 60mA)
12/24VDC 120/60mA
24V  75mAh Battery Pack
Run/stop/advance control via slide switch
On/Off switch
Manual daylight saving changes

Order Numbers:
360          Mini Quartz Master Clock including battery pack
360–24   Replacement 24V  75mAh Battery Pack
   

"NEW"   KHU2711 Computer Master Clock

For up to 35x slave clocks (12/24VDC 500/250mA)
3 months battery back-up with automatic setting/re-setting
Hands-free daylight saving changes

Order Number:
KHU2711     1x impulse output, 1x programmable relay
   

TEMPUS Master Clock

Versions: Tempus, Tempus E, Tempus P
Master clock, bell and relay program controller
with 3-wire tower clock control and 24VDC
alternating minute impulse output.
Depending on version with bell striker control
or relay program

Order Codes:
Tempus            =  Time only
Tempus GPS    =  Tempus with built in GPS
Tempus E         =  Time and 2x Bell Striker control
Tempus P         =  Time and 2x Relay programs
   
   
 

4850 Master Clock in subrack case

Dimensions: (width x depth x hight) 483 x 170 x 44 mm (19" x 6.7" x 1.75")
Display: 6x digits, 14 mm high figures, bright red LEDs
Viewing Distance: greater than 7m
Outputs: 1x RS232/RS485 serial ASCII time and date output; 1x w482 time code output

Order Number: 4850.R.S.AU

 
  4850 Master Clock in table top case

Dimensions: (width x depth x hight) 173 x 178 x 49 mm (6.8" x 7" x 2")
Display: 6x digits, 14 mm high figures, bright red LEDs
Viewing Distance: greater than 7m
Outputs: 1x RS232/RS485 serial ASCII time and date output; 1x w482 time code output

Order Number: 4860.T.S.AU

 
 

4860 Network Time Server - Master Clock in subrack case

Dimensions: 1U high case (width x depth x hight) 483 x 44 x 185 mm (19" x 1.75" x 7.3")
Display: 6x digits, 14 mm high figures, bright red LEDs
Viewing Distance: greater than 7m
Outputs: 1x RS232/RS485 serial ASCII time and date output; 1x w482 time code output 1x network time server

Order Numbers:
4860net.S1.AU
4860.IMP.S1.AU  (as above, but in addition with 2x 24VDC 200mA alternating impulse output for 60x analogue impulse clocks)

 

NIS GPS Receiver

GPS receiver with antenna
1x DCF time code output and 1x RS232 output
Programmable local time off-set from UTC with
automatic daylight saving change-over
Accuracy: 0.001 sec/year
Case: IP 65 water and dust proof

Order Numbers
K-GPS/DCF-AU       1x GPS Receiver with DCF output and external antenna
TEMPORA

Master Clock - Bell Controller - Programmer for the controll of clocks, cast bells and relays. This controller operates cast bells and carillons.


TEMPORA - DIGITAL

Master Clock - Digital Bell Controller - Programmer for the control of clocks, digital bells and relays. The digital bells sound like real bells.
An amplifier and loudspeaker(s) are needed for the reproduction of the bell recording. Swinging, tolling bells and carillons simulation.
Suitable for churches, shopping centres, town halls, etc.
   

PERCONTA
Master Clock & Bell/Carillon Controller

Lasting quality & latest technology
Programmable master Clock Bell & Carillon Controller
with 4 or 6 programmable relays
Several years back-up without NiCad batteries
Automatic daylight saving change over
Tolling and Swinging Bells
Westminster and Hour Strokes
Optional Carillon Melodies with up to 16x bells
Optional 24VDC alternating minute impulse output
for internal, external or Tower Clocks
Stand alone Quartz Crystal Operation or
controlled by a GPS Receiver
Power Supply: 230VAC +/- 10% 45/65Hz 12-30VA
Dimensions: HxWxD 214 x 263 x 114mm
Weight: approx. 2.8 kg

Order Numbers:
Perconta HU4
Perconta HU6
Perconta HU12
Perconta GLSP		 4 programmable circuits
12 programmable circuits
24 programmable circuits
control of up to 16x carillon bells
K-CSHU500

Computer Master Clock with 2x programmable relays
Ten years battery back-up
Automatic daylight saving
24VDC 400mA polereversing impulse output
for up to 65x slave clocks or 13x Telnu clocks
With external power supply up to 24V 1.5A capacity
Automatic setting/re-setting
Master or satellite operation
Power Supply: 230/240VAC 50/60Hz 15VA
Dimensions: K-CSHU-500 HxWxD 158x75x120mm
Weight: approx. 980 g

Relay Output Specifications
2x circuits, contact rating: 0.1V-250V 125VA (0.5A)
325x program settings
Seconds resolution
Impulse (e.g.: bells) and on/off switching (e.g.: lighting)
Variable impulse length (1-99 sec)
Weekly, yearly, holiday and block program
Memory card for relay program back-up or transfer

Order Number: K-CSHU500
FCSHU500-Rack

As above but in subrack module

Order Number: FCSHU500-Rack
Telnu 30

Intelligent Telnu Master Clock for self-correcting slave clocks
10x years battery back-up
Automatic daylight saving change-over
Output voltage: 24-30VDC 1A = 30 Telnu clocks of 30mA each
Accuracy without GPS receiver: 0.2sec/day at 17-32 deg C
Enclosure: Impact resistant Polystyrol, light grey
Power Supply: 230/240VAC 50Hz 27VA
Dimensions: K-HU-Telnu HxWxD 150x75x106mm
Weight: approx. 1100 g

Order Numbers:
K-HU-Telnu30    Telnu Master Clock, max. 30 clocks
K-FHU-Telnu30  Telnu Master Clock, max. 30 clocks with external
                        GPS/DCF synchronisation
Telnu-Timer 4C

4 Channel Switch Computer for Telnu/DCF Slave Clock Operation
Output Channels:
   4-Channels, 1+2 change-over contacts,
   3+4 single normally open contact
Contact voltage: max. 230VAC max. 3A cos phi = 1
Enclosure: Impact resistant Polystyrol, light grey
Power Supply: 230/240VAC 50Hz 3VA
Dimensions: Telnu Timer 4C HxWxD 150x75x106mm
Weight: approx. 600 g

Order Number: K-Telnu-Timer 4C
Telnu Booster with Master Clock

Telnu Booster upgrades the output capacity of telnu master clocks.
Case: ABS enclosure for wall mounting.
Output: 2x output lines with a total combined max. current handling
of 2.5A. (approx. 83 Telnu-wall clocks).
Dimensions: 250 x 200 x 57 mm

Order Number: K-TELNU-BOOST-W

 



CONTACT HERTZ


  PREVIOUS PAGE HOME NEXT PAGE  

Last updated: 20 July 2010 webmaster@hertzelectronics.com.au http://www.hertzelectronics.com.au